Still LTX 50 Original Instructions Manual Download Page 33

Page: 33 / 286

Safety devices

Damage, defects and misuse of

safety devices

The driver must report any damage or other

defects to the truck or attachment immediately

to the supervisory personnel.
Trucks and attachments that are not functional

or safe may not be used until they have been

properly repaired.
Do not remove or deactivate safety devices

and switches.
Fixed set values may only be changed with

the approval of the manufacturer.
Work on the electrical system (e.g. connecting

a radio, additional headlights etc.) is only per-

mitted with the manufacturer's written appro-

val. All electrical system interventions must be

documented.

Safety

Safety devices

45878043344 EN - 11/2021 - 12

Summary of Contents for LTX 50































































































































































































































































































Search results

Summary of Contents for LTX 50

Reviews:

Related manuals for LTX 50

Brands by name

Popular brands

Still LTX 50, Original Instructions Manual

Search results

Summary of Contents for LTX 50

Reviews:

Related manuals for LTX 50

Brands by name

Popular brands