Still LTX 50, Original Instructions Manual

Page: 29 / 286

with these regulations either intentionally or
due to negligence.
Stability
The stability of the truck has been tested in
accordance with up-to-date technical regula-
tions and is guaranteed if the truck is used
correctly and in line with the intended purpose.
These standards only take into account the
static and dynamic tipping forces that can
arise during use in accordance with the oper-
ating standards and intended purpose. In ex-
treme cases there is a risk of exceeding the
moment of tilt due to improper use or incorrect
operation, which will affect stability.
The risks caused by improper use, and which
are therefore prohibited, may include:
●
loss of stability due to unstable or sliding
loads etc.;
●
turns at excessive speeds;
●
moving with the load raised;
●
moving with a load that is projecting to the
side (e.g. side shift);
●
turning and driving diagonally across
slopes;
●
driving on slopes with the load pointing
downhill;
●
oversized loads;
●
swinging loads;
●
steps or ramp edges.
WARNING
These risks are caused by improper use.
Improper use (e.g. swinging loads, transporting liq-
uids etc.) is PROHIBITED unless specifically ap-
proved in writing by the manufacturer.
Electromagnetic radiation
The limit values for the truck's electromagnetic
emissions and immunity are those set out in
the EN 12895 standard.
If an electric and/or electronic device is subse-
quently attached to the outlet of the product
ex-works, this could affect the truck's electro-
magnetic compatibility and thereby invalidate
the original certificate. Any electric and/or
electronic attachments must be installed in ac-
cordance with technical regulations by special-
ly trained personnel. In any case, the manu-
facturer CANNOT be held liable for the truck
Safety
2
Electromagnetic radiation
19 45878043344 EN - 11/2021 - 12