Still LTX 50 Original Instructions Manual Download Page 207

Page: 207 / 286

Maintenance as required

Preparation

Maintenance personnel

The battery may only be changed by specially

trained personnel, in accordance with the

manufacturer's instructions for the battery, the

battery charger and the truck. The mainte-

nance instructions for the battery must be ob-

served.

Fire prevention measures

WARNING

Do not smoke or use a naked flame

when handling batteries. In the area des-

ignated for parking the truck to recharge

the battery or battery charger, there

should be no flammable materials or

substances that can cause sparks within

a radius of at least 2 metres. The charg-

ing area must be well ventilated. Keep a

fire extinguisher at hand.

Safe parking

Park the truck securely before carrying out

work on the battery. The truck can only be op-

erated when the battery cover is closed and

the battery outlet is inserted. If the truck is en-

abled for side removal of the battery, the truck

can only be operated once the battery is fixed

in place properly using the battery locking sys-

tem.

Servicing the battery

The lids of the battery cells must be kept dry

and clean. Any leakage of battery acid must

be neutralised immediately. Terminals and

soldering lugs must be clean and lightly

greased with pole grease.

Battery type

Trucks can be fitted with different types of bat-

tery. Observe the instructions on your battery

type plate, as well as the specifications de-

fined in the chapter "Technical data".

Maintenance

Maintenance as required

197

45878043344 EN - 11/2021 - 12

Summary of Contents for LTX 50































































































































































































































































































Search results

Summary of Contents for LTX 50

Reviews:

Related manuals for LTX 50

Brands by name

Popular brands

Still LTX 50, Original Instructions Manual

Search results

Summary of Contents for LTX 50

Reviews:

Related manuals for LTX 50

Brands by name

Popular brands