Still LTX 50 Original Instructions Manual Download Page 130

Page: 130 / 286

Adjusting the sprung operator

platform (optional)

To improve driving comfort and to reduce the

vibrations felt by the operator, adjust the pres-

sure in the damping system in accordance

with the weight of the operator.
Use a suitable compressor and adjust the

pressure using the valve (1).
Adjustment is optional and only available on

trucks with gas-sprung operator platforms.

Read

⇒

Chapter "Safety guidelines for driver's

seat adjustment work (described in the follow-

ing sections)", Page 114
Near the valve is a label that shows the ad-

justment pressure depending on the weight of

the operator:

●

1.2 bar: below 70 kg

●

1.7 bar: between 70 and 90 kg

●

2.2 bar: between 90 and 110 kg

●

2.6 bar: between 110 and 130 kg

2373



Use

Optional driver's seat adjustments

120

45878043344 EN - 11/2021 - 12

Summary of Contents for LTX 50































































































































































































































































































Search results

Summary of Contents for LTX 50

Reviews:

Related manuals for LTX 50

Brands by name

Popular brands

Still LTX 50, Original Instructions Manual

Search results

Summary of Contents for LTX 50

Reviews:

Related manuals for LTX 50

Brands by name

Popular brands