Still LTX 50, Original Instructions Manual

Page: 231 / 286

(1) with holder for vertical pallet 1365 / 765
mm
(2) with forks lenght 2390 mm / x=1615 mm /
pull bar version; for other forks dimension see
table below
(3) with load arms or forks raised
(4) with tray 54 or Li-ion + 114 mm
(5) with mandatory load backrest (1290 mm
from the forks to the top for OPX-L 20 S and
OPX-L 12; 1575 mm for OPX-L16)
(6) with lifting platform option h
7
+30 mm; h
14
+87 mm
(7) with lifting platform 87 mm; with till-
er adjustment option, h
14
setting range = +89
mm ¸ -19 mm
(8) minimum ground clearance under the
chassis with mandatory foot guard
(9) on rounded edge slope with forks / arms
raised, if possible
(10) for the geometric limit on unrounded edge
slope, see table below
(11) in bracket: minimum geometric limit on
unrounded edge slope without or with foot
guard (if different); due to manufacturing and
assembly tolerances, it is recommended to
foresee a decrease in the nominal values of
not less than 1%
(12) with 1000 kg on mast and 1000 kg on ini-
tial lift at max initial lift height
OPX 20 / 25 / 20 Plus / 25 Plus fork overview
push
bar
l
mm
c
mm
x
(a)
mm
y
(a) (b)
(c)
mm
990 500 805 1907
1190 600 1005 2107
1450 750 1265 2367
1650 850 1465 2567
1650 850 1105 2207
1800 900 1615 2717
2150 1100 1605 2707
2150 1100 1375 2477
Technical data
6
Datasheet (VDI): OPX
221 45878043344 EN - 11/2021 - 12