Still LTX 50 Original Instructions Manual Download Page 173

Page: 173 / 286

Using the truck on the loading bridge

and inside a container

DANGER

Risk of accident
Before driving on to a loading bridge, the operator

must check that the bridge has been properly assem-

bled and secured, and that it has sufficient load ca-

pacity.

You must drive onto the loading bridge slowly and

carefully.
The operator must check that the vehicle to be loa-

ded or unloaded is sufficiently secure so that it will

not move and that it is suitable to support the stress

created by the truck.
The lorry driver and the forklift operator must agree

on the time of departure of the lorry.

Use

Moving the load

163

45878043344 EN - 11/2021 - 12

Summary of Contents for LTX 50































































































































































































































































































Search results

Summary of Contents for LTX 50

Reviews:

Related manuals for LTX 50

Brands by name

Popular brands

Still LTX 50, Original Instructions Manual

Search results

Summary of Contents for LTX 50

Reviews:

Related manuals for LTX 50

Brands by name

Popular brands