Still LTX 50 Original Instructions Manual Download Page 116

Page: 116 / 286

Transporting and lifting the truck

Transporting the truck

The forklift is normally transported by road and

rail. If the forklift's dimensions exceed the

max. clearance size allowed, it is transported

disassembled. The sales network is in charge

of the disassembly and reassembly opera-

tions. The forklift must be secured to the trans-

port means during transport using appropriate

restraint systems. Block the wheels with

wedges to prevent even the slightest move-

ment.

OM0747



Climatic Conditions for Transport and Storage

The forklift must be protected from atmospher-

ic agents during transport and storage.

Use

Transporting and lifting the truck

106

45878043344 EN - 11/2021 - 12

Summary of Contents for LTX 50































































































































































































































































































Search results

Summary of Contents for LTX 50

Reviews:

Related manuals for LTX 50

Brands by name

Popular brands

Still LTX 50, Original Instructions Manual

Search results

Summary of Contents for LTX 50

Reviews:

Related manuals for LTX 50

Brands by name

Popular brands