Steris 4085 Maintenance Manual Download Page 37

Page: 37 / 177

4-4

150832-639

Operator Manual

Operating Instructions

Figure 4-3. STERIS 4085 General Surgical Table

Primary Hand Control

SLIDE FOOT:

When depressed, Zip-Slide moves tabletop toward

foot end. When slide returns to central ("0") position,

movement

stops for one second before continuing

. LCD Display Slide Head

ICON (refer to

Table 1-3

) displays. An ICON is not displayed at

center (“0”) position.

HEIGHT UP:

When depressed, the

entire

tabletop rises.

HEIGHT DN:

When depressed, the

entire

tabletop lowers.

TREND:

When depressed, the head end of the tabletop lowers; or,

foot end raises.

REVERSE TREND:

When depressed, the head end of the tabletop

rises; or, foot end lowers.

TILT LEFT:

When depressed, the tabletop rolls to the left (patient

left or viewing the table from the head end).

TILT RIGHT:

When depressed, the tabletop rolls to the right

(patient

s right or viewing the table from the head end).

LCD Display

Summary of Contents for 4085


















































































































































































Search results

Summary of Contents for 4085

Reviews:

Related manuals for 4085

Brands by name

Popular brands

Steris 4085, Maintenance Manual

Search results

Summary of Contents for 4085

Reviews:

Related manuals for 4085

Brands by name

Popular brands