manualshive.com logo in svg

Steris 4085, Maintenance Manual

Share
Download
Steris 4085 Maintenance Manual Download Page 132

i

764333-767

© 2009, STERIS  Corporation     All rights reserved.

Printed in U.S.A.

A Word From STERIS Corporation

Thank you for choosing this fine STERIS product. STERIS
is committed to ensuring your continued satisfaction.
This manual illustrates and identifies assemblies and
components of the STERIS 4085 General Surgical Table.

All personnel involved in the use and maintenance of
this equipment must carefully review and comply
with the 

S

AFETY

  P

RECAUTIONS

 and instructions

contained in the Maintenance Instructions (P764333-
766). Do not begin service of this Surgical Table until
you have become familiar with this information.

GENERAL

Assemblies and components of the STERIS 4085
General Surgical Table are illustrated and identified on
the following pages. The part number, the description
and the quantity required for each usage are given. Each
indentation in the description represents the assembly
level. The 

UNITS PER ASSEMBLY

 column is specific

for the given assembly or subassembly level.

HOW TO USE THE ILLUSTRATED PARTS 
BREAKDOWN

1. Determine the function and application of the part

required. Examine the list of illustrations and select
the most appropriate title. Note the illustration page
number.

2. Turn to the page indicated and locate the desired part

on the illustration (see Example 1).

3. From the illustration, obtain the item number

assigned to the part desired. Refer to the
accompanying description for specific information
regarding the part (see Example 1).

4. The abbreviation A/R means “As Required” or

“Amount Required.”

5. The abbreviation SS means “Stainless Steel.” 

SPECIAL INSTRUCTIONS

Table 1

 provides part numbers and figure references

for the most commonly replaced items on a STERIS 4085
General Surgical Table and 

Table 2

 does the same for

the hydraulics assembly. These tables are for quick
reference only. For a complete listing of parts, refer to
the appropriate Figure and associated Illustrated Parts
Breakdown (IPB) in this Section of the maintenance
manual.

Table 3

 provides the part numbers, descriptions and

locations of the various labels supplied on this table.

Table 4

 provides part numbers and descriptions of the

hardware not shown in the individual illustrations. 

IMPORTANT: A listing of the 

S

AFETY

 P

RECAUTIONS

 to be observed when operating and servicing this

equipment can be found in 

S

ECTION

1

 of the 

Maintenance Instructions

 (P764333-766). Do not operate

or service the equipment until you have been trained on this information.

WARNING – PERSONAL INJURY AND/OR 
EQUIPMENT DAMAGE HAZARD: Repairs 
and adjustments to this equipment must be 
made only by STERIS or STERIS-trained service 
personnel. Maintenance performed by 
unqualified personnel or installation of 
unauthorized parts could cause personal injury, 
result in improper equipment performance, 
invalidate the warranty, or result in costly 
damage. Contact STERIS regarding service 
options.

CAUTION – POSSIBLE EQUIPMENT 
DAMAGE: To prevent voiding the warranty 
or damaging the equipment, use only STERIS 
replacement parts.

Summary of Contents for 4085


















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands