Spectra Logic Spectra nTier700, Installation Manual

Page: 86 / 120

Chapter 5 – Maintenance
86
3. Position the drive sled over a drive slot in the blade with the latch toward the center
of the blade and the edges aligned with the guides in the drive slot (Figure 5-8).
4.
Slide the drive sled into the drive slot and press down firmly until an audible click
indicates that the drive sled is seated. If the drive sled latch does not automatically
latch when you seat the drive, press down firmly on the latch until you hear the
click.
As soon as the drive is seated in the blade, it powers on and the nTier700 VTL
begins rebuilding the RAID volume.
5.
Using the blade handle, slide the blade completely into the nTier700 VTL enclosure
until it is firmly seated.
6.
Package the malfunctioning drive and ship it to Spectra Logic as described in RMA
Returns on page 89.
Figure 5-8 Align the drive sled with the drive slot.