47
3
Configuring the nTier700 VTL
This chapter describes how to configure your Spectra nTier700 VTL for operation in
your environment.
Before You Begin
Review the Configuration Process
on page 48
Accessing the BlueScale Web Interface
on page 48
Configuring Additional Network Connections
on page 50
Configuring Remote Power Management
on page 52
Before You Begin
Before you begin configuring the Spectra nTier700 VTL, perform the following tasks:
Install the nTier700 VTL and connect it to an Ethernet network (see
Connecting the
Cables and Powering On
on page 40).
Make sure Ethernet port 1 on the nTier700 VTL has a valid IP address and you
know what that address is (see
Setting the IP Address for Ethernet Port 1
on
page 42).
Install VTL Console on a Windows-based computer connected to the same network
as the nTier700 VTL. Read the I
mplementing nTier Deduplication
guide for
complete installation instructions.
Summary of Contents for Spectra nTier700
