Spectra Logic Spectra nTier700, Installation Manual

Page: 55 / 120

Next Steps
55
Change the RMM Super User Password (Recommended)
You use the superuser login information when connecting to the RMM to configure and
use its features.
Use the following steps to change the default superuser name and password.
1.
Enter the superuser name in the
Super User login
field.
2. Enter the current password in the Super User Password field.
3.
Enter a new password in the
New password
field, then re-enter the new password in
the
New password (confirm)
field.
4.
Select
OK
to save your changes.
Next Steps
The initial hardware configuration is now complete. For information about using the
nTier700 VTL, refer the following:
ƒ
Read the Implementing nTier Deduplication guide to learn about installing and
using the FalconStor software.
ƒ
If you have not already done so, install the VTL Console on a Windows-based
computer on the same network as the nTier700 VTL appliance.
ƒ
Use the VTL Console to configure the connections between the nTier700 VTL
appliance and a server and to configure, operate, and monitor the virtual tape
libraries. You also configure the deduplication functionality using the VTL
Console.
ƒ
Read
Chapter 4 – Using the nTier700 VTL BlueScale Web Interface
in this guide to
learn about using the BlueScale web interface and the blade operator panels. This
chapter also provides information about restarting or shutting down the
nTier700 VTL hardware.
ƒ
Read Chapter 5 – Maintenance to learn about replacing a data drive in your
nTier700 VTL appliance.