Spectra Logic Spectra nTier700, Installation Manual

Page: 102 / 120

Appendix C – Specifications
102
Power Specifications
This section describes the power specifications for the Spectra nTier700 VTL.
Input Power Requirements
The following table shows input power requirements for the Spectra nTier700 VTL.
Power Cord Specifications
Note:
Three power cords are included with the nTier700 VTL and are
considered part of the unit. Do not use them with any other
equipment.
120 Volt-AC Power Cord for Use
in North America
The power cords included with
the Spectra nTier700 VTL appliance are standard, three-conductor, 16-AWG power
cords safe for 120-volt use in the United States and Canada. The cable has a molded
NEMA 5-15P male connector to plug into an electrical outlet and a molded IEC
60320 C13 female connector to plug into the nTier700 VTL power supply.
220 Volt-AC Power Cord for Use in North America
The criteria for a 220-volt AC
power cord for the nTier700 VTL are as follows:
ƒ
It must have a molded IEC 60320 C13 female connector to connect to the
nTier700 VTL power supply.
ƒ
It must be SJT type, three-conductor, 18 AWG minimum.
ƒ
It must comply with local electrical code.
Source Requirements
Input Voltage 100 – 240 VAC
Input Frequency 50 – 60 Hz
Current 12 amps per cord
Power Consumption 1200 watts, maximum
Figure 1 120 Volt-AC Power Cord for Use in North America (Spectra
Logic P.N. 8289).
IEC 60320 C13
female connector
NEMA 5-15P
male connector