Spectra Logic Spectra nTier700, Installation Manual

Page: 27 / 120

Unpacking the nTier700 VTL
27
Unpacking the nTier700 VTL
The Spectra nTier700 VTL and its drives are shipped in cardboard boxes attached to
pallets. The only tool needed to unpack them is a pair of scissors.
Prepare the Unpacking Location
Note:
Make sure that you have a work space area prepared before you
remove the nTier700 VTL from its shipping box.
Set the pallet with the boxes in a location that gives you adequate clearance around
and above the shipping box so that you can safely unpack it.
Unpack the Components
Save all the original packing materials in case it is necessary to ship or move the
nTier700 VTL later.
1.
Move the shipping box and the boxes containing drives, the rack mounting kit,
accessories, and documentation to the location where the nTier700 VTL will be
installed.
Warning:
The nTier700 VTL weighs approximately 134 lb. (61 kg.)
without drives installed. Use extreme caution when moving it.
Always use two people, one on each side, when lifting or
moving it.
Warnung:
Die nTier700 VTL wiegt ca 61 kg., ohne Laufwerke installiert.
Verwenden Sie extreme Vorsicht walten lassen, wenn sie
abwandern. Benutzen Sie immer zwei Personen, eine auf jeder
Seite, beim Heben oder Fortbewegen.
2.
Use scissors to cut away the plastic wrap surrounding the shipping box.