Sony DVS-9000, User Manual

Page: 824 / 1228

Cha
p
te
r 15
Ut
ilit
y/
S
hot
bo
x
824
Shotbox Register Creation
Note
Only in [SHOTBOX] operation mode with the [STORE] button lit, the
[SNAPSHOT] button or [EFF] button lights green to indicate that a setting
operation is in progress for the purpose of saving snapshot data or effect
data in a shotbox register.
5
Press the region button for the snapshot you want to save, turning it on.
6
Enter the desired shotbox register number with the numeric keypad
buttons.
To find an empty register, instead of entering a number, press the [.]
(period) button.
The display shows the relevant register numbers. When a register number
is postfixed with an “E,” the register is empty.
7
Press [ENTER].
This saves the region you turned on in step 5 , and the register number you
recalled for that region as a snapshot setting in a shotbox register, and the
[STORE] button goes off. At the same time, the [RCALL] button lights.
8
In the numeric keypad control block, press the [EFF] button, turning it on.
9
Specify the register number of the keyframe effect you want to save in a
shotbox register, and then recall it for each region.
For details of the procedure for recalling a register, see “Recalling a
Register” (page 723).
10
Referring to steps 3 to 5 , carry out the setting operation for effect register
saving. In step
4
, however, press the [EFF] button, lighting it green.
11
Enter the shotbox register number specified in step
6
using the numeric
keypad buttons.
12
Press the [ENTER] button.
This saves the effect setting in a shotbox register, and the [STORE] button
goes off. At the same time, the [RCALL] button lights.
To change the contents of a shotbox register
After recalling the shotbox register you want to change, referring to the
previous item “
Creating a shotbox register,” change the contents of the
shotbox register, and save.