Sony DVS-9000, User Manual

Page: 631 / 1228

631
DME Special Effect Operations
Chapt
er
11
DME Ope
ra
tions
2
Press [Light 1], turning it on.
This enables the Light 1 light source, and you can now use the knobs to
adjust the parameters.
3
Set the following parameters.
• Lowering the brightness of the image makes Spotlighting more
effective.
• The Total Ambient setting is shared with the Lighting function.
4
In the <Spot Mode> group, select the type of light source.
Parallel: Parallel light source. The direction can be set.
Point: Point light source. The position can be set.
Line: Line light source. The position and angle can be set.
Whole: Non-directional light source which illuminates the whole image
(no settings).
For more information about light source types, see “Light source types”
(page 623).
5
According to the selected light source type, set the following parameters.
When you selected Parallel
a) Minus moves counterclockwise, plus moves clockwise.
When you selected Point
a) Minus moves left, plus moves right.
b) Minus moves down, plus moves up.
c) Minus moves forward, plus moves deeper.
Knob Parameter Adjustment Setting values
1 Total
Ambient Brightness of whole image 0.00 to 100.00
2 Intensity Intensity (brightness) of the light
source 0.00 to 100.00
3 Soft Softness of the lighted area 0.00 to 100.00
Knob Parameter Adjustment Setting values
1 Longitude Longitude
–8.00 to +8.00
a)
2 Latitude Latitude –8.00 to +8.00
Knob Parameter Adjustment Setting values
1 X Movement in X-axis direction
–6.00 to +6.00
a)
2 Y Movement in Y-axis direction
–6.00 to +6.00
b)
3 Z Movement in Z-axis direction
–6.00 to +6.00
c)