Sony DVS-9000 User Manual Download

Page: 754 / 1228

Chapt

754

Time Settings

Note

In addition to the above operation, the effect duration may also be changed
as a result of inserting or deleting keyframes.

See “Time Settings” (page

707).

Setting the Delay

To set the delay

(see “Time Settings” (page 707))

, use the following procedure.

Press the [EDIT ENBL] button, turning it on.

Press the [DELAY] button, turning it on.

The display in the numeric keypad control block shows “DELAY”
followed by the delay time (seconds:frames).

Using the numeric keypad in the numeric keypad control block, enter the
timecode value for the delay, as a maximum of four digits.

You can also use the [TRIM] button to enter a difference value.

(See “To

enter a difference value” (page 736).)

Press the [ENTER] button to confirm the entry.

This changes the delay setting.

Summary of Contents for DVS-9000













































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for DVS-9000

Reviews:

Related manuals for DVS-9000

Brands by name

Popular brands

Sony DVS-9000, User Manual

Search results

Summary of Contents for DVS-9000

Reviews:

Related manuals for DVS-9000

Brands by name

Popular brands