Sony DVS-9000, User Manual

Page: 1161 / 1228

1161
Serial Port Settings (Serial Port Assign Menu)
Chapt
er
22
DCU
Se
tu
p (DCU)
In the lower part of the status area appear the video port number and
response speed settings.
4
In the <DDR Type> group, select the type of disk recorder.
Player: Functioning as a player.
Recorder: Functioning as a recorder.
5
In the <Name Mode> group, select the file name character count mode.
Fixed 8 Character: Use 8-character file names.
Variable Length: Use variable-length file names. (The file name is
limited to 23 characters.)
6
In the <TC Sense> group, select the type of timecode sensing.
Zero based: Mode in which timecode is detected taking the first frame of
the recalled file as 00:00:00:00
SOM based: Mode in which timecode saved in the recalled file is detected
Note
The details of the above operation modes depend on the connected device.
For more information, consult the documentation for the connected device.
7
Using any of the following methods, specify the item to which the video
port number or response speed setting applies.
• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob.
a) 1. Video Port: Number of the video port associated with the serial port to which the setting
applies
For a player, the output port setting
For a recorder, the input port setting
2. Maximum Open Delay: maximum time required to open a file
3. Maximum Cueup Delay: maximum time required to cue up a file
4. Play After Cueup Delay: delay time from the cued-up state to begin playback
5. Stop Delay: delay time from issuing the stop command until actually stopping
6. Still Delay: delay time from issuing the still command until actually stopping
7. Continue Delay: delay time from issuing the continue command until actually stopping
8
Turn the knob to set the disk recorder video port number or response speed.
Knob Parameter Adjustment Setting values
1 Item No Item selection
1 to 7
a)