Sony DVS-9000, User Manual

Page: 801 / 1228

801
Snapshot Operations in the Multifunction Flexi Pad Control Block
Cha
p
te
r 14
S
nap
s
h
ot
s
The button you pressed lights yellow, and this completes saving. The
[STORESTATS] button lights amber, and the numeric display shows the
bank number followed by the number of the selected register.
To enter the number of the desired snapshot save destination
register using the numeric keypad
After step 2 above, press the [10 KEY] button in the memory recall section.
This switches the memory recall section to the numeric keypad input mode,
and after pressing the [STOR] button, lighting it yellow, you can enter the
desired register number from the numeric keypad. The number you entered
appears in the alphanumeric display.
To find an empty register, press the [ . ] button without entering a number, and
the number of an empty register appears in the alphanumeric display.
Confirm the displayed number by pressing the [ENTR] button. This saves the
data in the specified register.
To cancel a snapshot save operation
After saving a snapshot, to cancel the save, hold down the [STORE STATS]
button and press the [UNDO] button.
The light of [STORE STATS] button changes from amber to green.
Note
With a simple type Flexi Pad control block, it is not possible to cancel saving
a snapshot.
Adding attributes in the Multifunction Flexi Pad control block
1
Press the [EDIT ENBL] button.
The button indications in the memory recall section change as shown in the
following illustration.
To cancel adding attributes, press the [EDIT ENBL] button once more, or
press the [EXIT] button.