Sony DVS-9000, User Manual

Page: 1121 / 1228

1121
Interfacing With External Devices (Device Interface Menu)
Cha
p
te
r 20
Swi
tc
h
e
r S
e
tup (Swit
c
her
)
Interfacing With External Devices (Device
Interface Menu)
To carry out setup relating to connections with external devices, display the
Switcher >Device Interface menu.
To display the Device Interface menu
In the Engineering Setup menu, select VF3 ‘Switcher’ and HF7 ‘Device
Interface.’
The following functions are available here.
•
Remote Assign: Set the use of the four 9-pin ports.
• GPI Input: Set the GPI input ports and trigger polarities, and make the
action settings.
• GPI Output: Set the GPI output ports and trigger polarities, and make the
action settings.
• Aux Control: Set whether operations on the AUX buses from the four 9-pin
ports are inhibited.
• DME Type Setting: When the DME is an MVE-9000 or MVE-8000A, carry
out interface settings, and for an SDI interface set the AUX bus outputs and
reentry inputs.
Making 9-Pin Port Device Interface Settings
The description in this section takes the REMOTE1 port as an example. For
other REMOTE ports, carry out the same process as required.
1
In the Switcher >Device Interface menu, press [Remote Assign].
The Remote Assign menu appears.
2
Select the device interface you want to set for the REMOTE1 port from the
<Remote1> group.
Editor A: assign Editor A to the REMOTE1 port.
Editor B: assign Editor B to the REMOTE1 port.
AUX: assign AUX to the REMOTE1 port.
DME1: assign DME1 to the REMOTE1 port.