Snap-On Sun SWB 340, Operator'S Manual

Page: 98 / 152

98
5-60
5-62
5-61
5-63
5-64
29
26
Operation
Fig. 5-60 MINIMISATION “ Un.10 ”, outside
— Rotate the wheel into marking position following the
arrows.
— In this position provide a double mark on the tyre
outer side exactly perpendicular to and above the
chuck.
— Confi rm by pressing menu key 26 .
The MINIMISATION “Un.11” is displayed ( Fig. 5-62 ).
Figure 5-61 MINIMISATION “ Un.10 ”, inside
If the tyre cannot be turned over on the rim (e.g.:
Asymmetrical and Directional),
— press the menu key 29 , then
— Continue as shown on screen
MINIMISATION “Un.10” ( Fig. 5-60 ).
If the wheel can be turned over on the rim;
—
Rotate the wheel into marking position following the
arrows.
— In this position provide a double mark on the tyre,
on the inner side of the wheel, precisely above the
chuck.
— Turn the tyre over on the rim (tyre changer) .
— Confi rm by pressing menu key 26 .
The MINIMISATION “Un.11” is displayed ( Fig. 5-62 ).
Figure 5-62 MINIMISATION “ Un.11 ”
— Readjust the tyre on the rim until the double mark
coincides with the valve (use tyre changer).
— Confi rm by pressing menu key 26 .
The MINIMISATION “Un.12” is displayed ( Fig. 5-63 ).