62
5-22
Operation
5.7 Easy ALU Functions
ALU 2P & ALU 3P
The
Easy Alu
function allows to automatically obtain
the rim dimensional data:
By touching two separate points you can have both
ALU 2P e ALU 3P
modes.
In both cases the
Easy Alu Toggle
key (
fi g. 5-22
)
allows to change the displayed selection after touching
the rim.
NORMAL
and
ALU 1P
By touching one point you have the NORMAL mode
available. The same is true if you press
Easy Alu
Toggle
(
fi g. 5-22
) of the
ALU 1P
mode.
EASY ALU TOGGLE
Automatic correction of the proposed Alu
According to the contact points of the gauge on the
rim, the machine deduces which Alu mode the user
probably wants. If the Alu proposed by the machine
does not exactly correspond to the desired one, it can
be changed by means of “
Easy Alu Toggle
” function.
—
Press the “
Easy Alu Toggle
” key (
Fig. 5-22
) to
obtain an Alu mode alternative to that offered for
the rim being processed.
Note
: Alu can be changed only before the measuring
run.
Summary of Contents for Sun SWB 340
Page 142: ...142 Blank Page...
