Snap-On Sun SWB 340, Operator'S Manual

Page: 90 / 152

90
5-46b
5-48
5-47
5-49
5-50
26
26
29
26
Operation
Figure 5-46b OPTIMISATION “ OP.10 ”, outside
— Rotate the wheel into marking position following the
arrows.
— In this position provide a double mark on the tyre
outer side exactly perpendicular to and above the
chuck.
— Confi rm by pressing menu key 26 .
The OPTIMISATION “OP.11” screen is displayed ( Fig.
5-48 ).
Figure 5-47 OPTIMISATION “ OP.10 ”, inside
If the tyre cannot be turned over on the rim (e.g.:
Asymmetrical and Directional),
— press the menu key 29 , then
— continue as shown on screen OPTIMISATION
“OP.10” ( Fig. 5-46b ).
If the wheel can be turned over on the rim;
—
Rotate the wheel into marking position following the
arrows.
— In this position provide a double mark on the inside
of the tyre, exactly perpendicular to and above the
chuck.
— Turn the tyre over on the rim (tyre changer) .
— Confi rm by pressing menu key 26 .
The OPTIMISATION “OP.11” screen is displayed ( Fig.
5-48 ).
Figure 5-48 OPTIMISATION “ OP.11 ”
— Readjust the tyre on the rim until the double mark
coincides with the valve (use tyre changer).
— Confi rm by pressing menu key 26 .
The OPTIMISATION “OP.12” screen is displayed ( Fig.
5-49 ).