Snap-On Sun SWB 340, Operator'S Manual

Page: 128 / 152

128
7-4
4
M A
B N
4
7-5
O
7-3
User Code
* = Factory confi guration
Setting the factory-adjusted modes of operation
(
F
5.2.2).
( Fig . 7-4 ) Select;
—
“ SETTINGS ”( 4 ), “ General Confi gurations ”
( A ), “ Set the preset operating mode ” ( M ),
No (*) = No action
Activate = Set default values
(“Activate” status is only shown briefl y)
After the confi rmation, this operating mode can
be acquired in the permanent memory
( Fig. 7-6 ).
Selecting the resolution of unbalance readings in
1 or 5 g, or 0.05 or 0.25 oz increments
( Fig . 7-5 ) Select;
— “ SETTINGS ”( 4 ), “ Operational Confi guration ”( B ),
“ Unbalance resolution ” ( N ),
Normal (*)= 5 g (0.25 oz) increments
Fine = 1 g (0.05 oz) increments
After the confi rmation, this operating mode can
be acquired in the permanent memory
( Fig. 7-6 ).
Selecting suppression of minor unbalance
readings
( Fig . 7-5 ) Select;
— ( 4 ), ( B ), ( O ),
Disabled = Suppression off
Enabled (*) = Suppression on
After the confi rmation, this operating mode can
be acquired in the permanent memory
( Fig. 7-6 ).
Wi-fi connections
( Fig . 7-3 ) Managing the network connections;
The machine can be connected to the network via Wi-fi .
The network connection lets the operator manage,
with a software (supplied separately), the printing from
remote and exchange the data between the balancer
and the workshop server (
F
6.7).
Note : The selection can be acquired in the permanent
memory.