72
5-30
21
Operation
5.9.2 Measuring run
It is good practice to perform a measuring run after
applying the weights.
Having fi nished the measuring run, if the wheel is
balanced correctly, both the numerical indicators
should indicate
0
and an
OK
should be displayed
(
Fig. 5-30
).
Warning
If both unbalance values show 0 but there is no OK
reading, dynamic unbalances below the threshold
value (suppression for values lower than 3.5 g) add to
a static unbalance above the threshold value.
To check how much imbalance is left:
•
Select the “Fine” key(
21,Fig. 5-30
).
Note:
The operator should decide if applying
the stated weight is necessary.
Summary of Contents for Sun SWB 340
Page 142: ...142 Blank Page...
