![background image](http://html1.mh-extra.com/html/smc-networks/6726al2-fiche/6726al2-fiche_management-manual_1300177238.webp)
C
ONFIGURING
THE
S
WITCH
3-188
Assigning Ports to Multicast Services
Multicast filtering can be dynamically configured using IGMP Snooping
and IGMP Query messages as described in “Configuring IGMP snooping
and Query Parameters” on page 3-133. For certain applications that
require tighter control, you may need to statically configure a multicast
service on the switch. First add all the ports attached to participating hosts
to a common VLAN, and then assign the multicast service to that VLAN
group.
Command Usage
•
Static multicast addresses are never aged out.
•
When a multicast address is assigned to an interface in a specific
VLAN, the corresponding traffic can only be forwarded to ports
within that VLAN.
Command Attributes
•
Interface
– Activates the Port or Trunk scroll down list.
•
VLAN ID
– Selects the VLAN to propagate all multicast traffic
coming from the attached multicast router/switch.
•
Multicast IP
– The IP address for a specific multicast service
•
Port
or
Trunk
– Specifies the interface attached to a multicast router/
switch.
Summary of Contents for 6726AL2 FICHE
