![background image](http://html1.mh-extra.com/html/smc-networks/6726al2-fiche/6726al2-fiche_management-manual_1300177133.webp)
A
CCESS
C
ONTROL
L
ISTS
3-83
CLI
– This example adds two rules:
1. Accept any incoming packets if the source address is in subnet 10.7.1.x.
For example, if the rule is matched; i.e., the rule (10.7.1.0 &
255.255.255.0) equals the masked address (10.7.1.2 & 255.255.255.0),
the packet passes through.
2. Allow TCP packets from class C addresses 192.168.1.0 to any
destination address when set for destination TCP port 80 (i.e., HTTP).
3. Permit all TCP packets from class C addresses 192.168.1.0 with the
TCP control code set to “SYN.”
Configuring a MAC ACL
Command Attributes
•
Action
– An ACL can contain any combination of permit or deny
rules.
•
Source/Destination Address Type
– Use “Any” to include all
possible addresses, “Host” to indicate a specific MAC address, or
“MAC” to specify an address range with the Address and Bitmask
fields. (Options: Any, Host, MAC; Default: Any)
•
Source/Destination MAC Address
– Source or destination MAC
address.
•
Source/Destination Bitmask
– Hexidecimal mask for source or
destination MAC address.
•
VID
– VLAN ID. (Range: 1-4094)
Console(config-ext-acl)#permit 10.7.1.1 255.255.255.0 any
4-122
Console(config-ext-acl)#permit tcp 192.168.1.0 255.255.255.0 any
destination-port 80
Console(config-ext-acl)#permit tcp 192.168.1.0 255.255.255.0 any
control-flag 2 2
Console(config-std-acl)#
Summary of Contents for 6726AL2 FICHE
