![background image](http://html1.mh-extra.com/html/smc-networks/6726al2-fiche/6726al2-fiche_management-manual_1300177287.webp)
S
YSTEM
M
ANAGEMENT
C
OMMANDS
4-47
The SSH server on this switch supports both password and public key
authentication. If password authentication is specified by the SSH client,
then the password can be authenticated either locally or via a RADIUS or
remote authentication server, as specified by the
authentication login
command on page 4-95. If public key
authentication is specified by the client, then you must configure
authentication keys on both the client and the switch as described in the
following section. Note that regardless of whether you use public key or
password authentication, you still have to generate authentication keys on
the switch and enable the SSH server.
To use the SSH server, complete these steps:
1.
Generate a Host Key Pair – Use the
ip ssh crypto host-key generate
command to create a host public/private key pair.
ip ssh crypto
host-key generate
Generates the host key
PE
4-53
ip ssh crypto zeroize Clear the host key from RAM
PE
4-54
ip ssh save host-key
Saves the host key from RAM to flash
memory
PE
4-54
disconnect
Terminates a line connection
PE
4-25
show ip ssh
Displays the status of the SSH server and
the configured values for authentication
timeout and retries
PE
4-55
show ssh
Displays the status of current SSH sessions PE
4-55
show public-key
Shows the public key for the specified user
or for the host
PE
4-57
show users
Shows SSH users, including privilege level
and public key type
PE
4-84
Table 4-15 SSH Commands
(Continued)
Command
Function
Mode
Page
Summary of Contents for 6726AL2 FICHE
