![background image](http://html1.mh-extra.com/html/smc-networks/6726al2-fiche/6726al2-fiche_management-manual_1300177338.webp)
C
OMMAND
L
INE
I
NTERFACE
4-98
radius-server host
This command specifies primary and backup RADIUS servers and
authentication parameters that apply to each server. Use the
no
form to
restore the default values.
Syntax
[
no
]
radius-server
index
host
{
host_ip_address
|
host_alias
}
[
auth-port
auth_port
] [
timeout
timeout
] [
retransmit
retransmit
]
[
key
key
]
•
index
- Allows you to specify up to five servers. These servers are
queried in sequence until a server responds or the retransmit period
expires.
•
host_ip_address
- IP address of server.
•
host_alias
- Symbolic name of server. (Maximum length: 20
characters)
•
port_number
- RADIUS server UDP port used for authentication
messages. (Range: 1-65535)
•
timeout
- Number of seconds the switch waits for a reply before
resending a request. (Range: 1-65535)
•
retransmit
- Number of times the switch will try to authenticate logon
access via the RADIUS server. (Range: 1-30)
•
key
- Encryption key used to authenticate logon access for client.
Do not use blank spaces in the string.
(Maximum length: 20 characters)
Default Setting
•
auth-port
- 1812
•
timeout
- 5 seconds
•
retransmit
- 2
Command Mode
Global Configuration
Example
Console(config)#radius-server 1 host 192.168.1.20 auth-port 181
timeout 10 retransmit 5 key green
Console(config)#
Summary of Contents for 6726AL2 FICHE
