![background image](http://html1.mh-extra.com/html/smc-networks/6726al2-fiche/6726al2-fiche_management-manual_1300177312.webp)
C
OMMAND
L
INE
I
NTERFACE
4-72
Example
Time Commands
The system clock can be dynamically set by polling a set of specified time
servers (NTP or SNTP). Maintaining an accurate time on the switch
enables the system log to record meaningful dates and times for event
entries. If the clock is not set, the switch will only record the time from the
factory default set at the last bootup.
Console#show logging sendmail
SMTP servers
-----------------------------------------------
1. 192.168.1.200
SMTP minimum severity level: 4
SMTP destination email addresses
-----------------------------------------------
1. [email protected]
SMTP source email address: [email protected]
SMTP status: Enabled
Console#
Table 4-22 Time Commands
Command
Function
Mode
Page
sntp client
Accepts time from specified time servers
GC
4-73
sntp server
Specifies one or more time servers
GC
4-74
sntp poll
Sets the interval at which the client polls for time GC
4-75
show sntp
Shows current SNTP configuration settings
NE,
PE
4-75
clock timezone Sets the time zone for the switch’s internal clock GC
4-76
calendar set
Sets the system date and time
PE
4-77
show calendar Displays the current date and time setting
NE,
PE
4-78
Summary of Contents for 6726AL2 FICHE
