![background image](http://html1.mh-extra.com/html/smc-networks/6726al2-fiche/6726al2-fiche_management-manual_1300177315.webp)
S
YSTEM
M
ANAGEMENT
C
OMMANDS
4-75
sntp poll
This command sets the interval between sending time requests when the
switch is set to SNTP client mode. Use the
no
form to restore to the
default.
Syntax
sntp poll
seconds
no sntp poll
seconds
- Interval between time requests. (Range: 16-16384 seconds)
Default Setting
16 seconds
Command Mode
Global Configuration
Example
Related Commands
sntp client (4-73)
show sntp
This command displays the current time and configuration settings for the
SNTP client, and indicates whether or not the local time has been properly
updated.
Command Mode
Normal Exec, Privileged Exec
Command Usage
This command displays the current time, the poll interval used for
sending time synchronization requests, and the current SNTP mode
(i.e., unicast).
Console(config)#sntp poll 60
Console(config)#
Summary of Contents for 6726AL2 FICHE
