![background image](http://html1.mh-extra.com/html/smc-networks/6726al2-fiche/6726al2-fiche_management-manual_1300177397.webp)
M
IRROR
P
ORT
C
OMMANDS
4-157
Mirror Port Commands
This section describes how to mirror traffic from a source port to a target
port.
port monitor
This command configures a mirror session. Use the
no
form to clear a
mirror session.
Syntax
port monitor
interface
[
rx
|
tx
]
no port monitor
interface
•
interface
-
ethernet
unit
/
port
(source port)
-
unit
- Stack unit. (This is unit 1)
-
port
- Port number. (Range: 1-26/52)
•
rx
- Mirror received packets.
•
tx
- Mirror transmitted packets.
Default Setting
No mirror session is defined.
Command Mode
Interface Configuration (Ethernet, destination port)
Command Usage
• You can mirror traffic from any source port to a destination port for
real-time analysis. You can then attach a logic analyzer or RMON
probe to the destination port and study the traffic crossing the source
port in a completely unobtrusive manner.
• The destination port is set by specifying an Ethernet interface.
Table 4-42 Mirror Port Commands
Command
Function
Mode
Page
port monitor
Configures a mirror session
IC
4-157
show port
monitor
Shows the configuration for a mirror port PE
4-158
Summary of Contents for 6726AL2 FICHE
