![background image](http://html1.mh-extra.com/html/smc-networks/6726al2-fiche/6726al2-fiche_management-manual_1300177257.webp)
L
INE
C
OMMANDS
4-17
Example
Related Commands
username (4-35)
password (4-17)
password
This command specifies the password for a line. Use the
no
form to
remove the password.
Syntax
password
{
0
|
7
}
password
no password
• {
0
|
7
} - 0 means plain password, 7 means encrypted password
•
password
- Character string that specifies the line password.
(Maximum length: 8 characters plain text, 32 encrypted, case
sensitive)
Default Setting
No password is specified.
Command Mode
Line Configuration
Command Usage
• When a connection is started on a line with password protection, the
system prompts for the password. If you enter the correct password,
the system shows a prompt. You can use the
password-thresh
command to set the number of times a user can enter an incorrect
password before the system terminates the line connection and returns
the terminal to the idle state.
• The encrypted password is required for compatibility with legacy
password settings (i.e., plain text or encrypted) when reading the
configuration file during system bootup or when downloading the
Console(config-line)#login local
Console(config-line)#
Summary of Contents for 6726AL2 FICHE
