![background image](http://html1.mh-extra.com/html/smc-networks/6726al2-fiche/6726al2-fiche_management-manual_1300177270.webp)
C
OMMAND
L
INE
I
NTERFACE
4-30
The
!
command repeats commands from the Execution command history
buffer when you are in Normal Exec or Privileged Exec Mode, and
commands from the Configuration command history buffer when you are
in any of the configuration modes. In this example, the
!2
command
repeats the second command in the Execution history buffer (
config
).
reload
This command restarts the system.
Note:
When the system is restarted, it will always run the Power-On
Self-Test. It will also retain all configuration information stored in
non-volatile memory by the
copy running-config startup-config
command.
Default Setting
None
Command Mode
Privileged Exec
Command Usage
This command resets the entire system.
Example
This example shows how to reset the switch:
end
This command returns to Privileged Exec mode.
Default Setting
None
Console#!2
Console#config
Console(config)#
Console#reload
System will be restarted, continue <y/n>? y
Summary of Contents for 6726AL2 FICHE
