![background image](http://html1.mh-extra.com/html/smc-networks/6726al2-fiche/6726al2-fiche_management-manual_1300177316.webp)
C
OMMAND
L
INE
I
NTERFACE
4-76
Example
clock timezone
This command sets the time zone for the switch’s internal clock.
Syntax
clock timezone
name
hour
hours
minute
minutes
{
before-utc
|
after-utc
}
•
name
- Name of timezone, usually an acronym. (Range: 1-29
characters)
•
hours
- Number of hours before/after UTC. (Range: 0-12 hours)
•
minutes
- Number of minutes before/after UTC. (Range: 0-59
minutes)
•
before-utc
- Sets the local time zone before (east) of UTC.
•
after-utc
- Sets the local time zone after (west) of UTC.
Default Setting
None
Command Mode
Global Configuration
Command Usage
This command sets the local time zone relative to the Coordinated
Universal Time (UTC, formerly Greenwich Mean Time or GMT),
based on the earth’s prime meridian, zero degrees longitude. To display
a time corresponding to your local time, you must indicate the number
of hours and minutes your time zone is east (before) or west (after) of
UTC.
Console#show sntp
Current time: Dec 23 05:13:28 2002
Poll interval: 16
Current mode: unicast
SNTP status : Enabled
SNTP server 137.92.140.80 0.0.0.0 0.0.0.0
Current server: 137.92.140.80
Console#
Summary of Contents for 6726AL2 FICHE
