![background image](http://html1.mh-extra.com/html/smc-networks/6726al2-fiche/6726al2-fiche_management-manual_1300177216.webp)
C
ONFIGURING
THE
S
WITCH
3-166
Command Attributes
•
Default Priority
13
– The priority that is assigned to untagged frames
received on the specified interface. (Range: 0-7, Default: 0)
•
Number of Egress Traffic Classes
– The number of queue buffers
provided for each port.
Web
– Click Priority, Default Port Priority or Default Trunk Priority.
Modify the default priority for any interface, then click Apply.
Figure 3-72 Port Priority Configuration
CLI
– This example assigns a default priority of 5 to port 3.
13. CLI displays this information as “Priority for untagged traffic.”
Console(config)#interface ethernet 1/3
4-144
Console(config-if)#switchport priority default 5
4-224
Console(config-if)#end
Console#show interfaces switchport ethernet 1/3
4-155
Information of Eth 1/3
Broadcast threshold: Disabled
LACP status: Disabled
Ingress rate limit: disable, Level: 30
Egress rate limit: disable, Level: 30
VLAN membership mode: Hybrid
Ingress rule: Enabled
Acceptable frame type: Tagged frames only
Native VLAN: 1
Priority for untagged traffic: 5
GVRP status: Disabled
Allowed VLAN: 1(u),
Forbidden VLAN:
Private-VLAN mode: NONE
Private-VLAN host-association: NONE
Private-VLAN mapping: NONE
Console#
Summary of Contents for 6726AL2 FICHE
