![background image](http://html1.mh-extra.com/html/smc-networks/6726al2-fiche/6726al2-fiche_management-manual_1300177473.webp)
P
RIORITY
C
OMMANDS
4-233
map ip dscp
(Global Configuration)
This command enables IP DSCP mapping (i.e., Differentiated Services
Code Point mapping). Use the
no
form to disable IP DSCP mapping.
Syntax
[
no
]
map ip dscp
Default Setting
Disabled
Command Mode
Global Configuration
Command Usage
• The precedence for priority mapping is IP Port, IP Precedence or IP
DSCP, and default switchport priority.
• IP Precedence and IP DSCP cannot both be enabled. Enabling one of
these priority types will automatically disable the other type.
Example
The following example shows how to enable IP DSCP mapping globally:
map ip dscp
(Interface Configuration)
This command sets IP DSCP priority (i.e., Differentiated Services Code
Point priority). Use the
no
form to restore the default table.
Syntax
map ip dscp
dscp-value
cos
cos-value
no map ip dscp
•
dscp-value
- 8-bit DSCP value. (Range: 0-63)
•
cos-value
- Class-of-Service value (Range: 0-7)
Console(config)#map ip dscp
Console(config)#
Summary of Contents for 6726AL2 FICHE
