![background image](http://html1.mh-extra.com/html/smc-networks/6726al2-fiche/6726al2-fiche_management-manual_1300177254.webp)
C
OMMAND
L
INE
I
NTERFACE
4-14
Line Commands
You can access the onboard configuration program by attaching a VT100
compatible device to the server’s serial port. These commands are used to
set communication parameters for the serial port or Telnet (i.e., a virtual
terminal).
Table 4-5 Line Commands
Command
Function
Mode Page
line
Identifies a specific line for configuration and
starts the line configuration mode
GC
4-15
login
Enables password checking at login
LC
4-16
password
Specifies a password on a line
LC
4-17
timeout login
response
Sets the interval that the system waits for a user
to log into the CLI
LC
4-18
exec-timeout
Sets the interval that the command interpreter
waits until user input is detected
LC
4-19
password-thresh Sets the password intrusion threshold, which
limits the number of failed logon attempts
LC
4-20
silent-time*
Sets the amount of time the management
console is inaccessible after the number of
unsuccessful logon attempts exceeds the
threshold set by the
password-thresh
command
LC
4-21
databits*
Sets the number of data bits per character that
are interpreted and generated by hardware
LC
4-22
parity*
Defines the generation of a parity bit
LC
4-23
speed*
Sets the terminal baud rate
LC
4-23
stopbits*
Sets the number of the stop bits transmitted per
byte
LC
4-24
disconnect
Terminates a line connection
PE
4-25
show line
Displays a terminal line's parameters
NE,
PE
4-25
* These commands only apply to the serial port.
Summary of Contents for 6726AL2 FICHE
