![background image](http://html1.mh-extra.com/html/smc-networks/6726al2-fiche/6726al2-fiche_management-manual_1300177401.webp)
R
ATE
L
IMIT
C
OMMANDS
4-161
rate-limit granularity
Use this command to define the rate limit granularity for the Fast Ethernet
ports, and the Gigabit Ethernet ports. Use the
no
form of this command
to restore the default setting.
Syntax
rate-limit
{
fastethernet
|
gigabitethernet
}
granularity
[
granularity
]
no rate-limit
{
fastethernet
|
gigabitethernet
}
granularity
•
fastethernet
– Fast Ethernet granularity
•
gigabitethernet
– Gigabit Ethernet granularity
•
granularity –
Sets rate limit granularity for the system. For Fast
Ethernet, choose 512 Kbps, 1 Mbps, or 3.3 Mbps. For Gigabit
Ethernet, only one granularity option is supported, 33.3 Mbps
Default Setting
Fast Ethernet interface – 3.3 Mbps
Gigabit Ethernet interface – 33.3 Mbps
Command Mode
Global Configuration (Ethernet, Port Channel)
Command Usage
Actual rate limit = Rate limit level * Granularity
Example
The following sets Fast Ethernet granularity to 1 Mbps, and Gigabit
Ethernet granularity to 33.3 Mbps.
Console(config)#rate-limit fastethernet granularity 1000
Console(config)#rate-limit gigabitethernet granularity 33300
Console(config)#
Summary of Contents for 6726AL2 FICHE
