![background image](http://html1.mh-extra.com/html/smc-networks/6726al2-fiche/6726al2-fiche_management-manual_1300177449.webp)
VLAN C
OMMANDS
4-209
This section describes commands used to configure private VLANs.
To configure primary/secondary associated groups, follow these steps:
1.
Use the
private-vlan
command to designate one or more community
VLANs and the primary VLAN that will channel traffic outside of the
community groups.
2.
Use the
private-vlan association
command to map the community
VLAN(s) to the primary VLAN.
3.
Use the
switchport mode private-vlan
command to configure ports
as promiscuous (i.e., having access to all ports in the primary VLAN)
or host (i.e., community port).
4.
Use the
switchport private-vlan host-association
command to
assign a port to a secondary VLAN.
Table 4-55 Private VLAN Commands
Command
Function
Mode Page
Edit Private VLAN Groups
private-vlan
Adds or deletes primary, community, or
isolated VLANs
VC
4-210
private-vlan association Associates a community VLAN with a
primary VLAN
VC
4-212
Configure Private VLAN Interfaces
switchport mode
private-vlan
Sets an interface to host mode or
promiscuous mode
IC
4-213
switchport private-vlan
host-association
Associates an interface with a secondary
VLAN
IC
4-214
switchport private-vlan
isolated
Associates an interface with an isolated
VLAN
IC
4-214
switchport private-vlan
mapping
Maps an interface to a primary VLAN
IC
4-215
Display Private VLAN Information
show vlan private-vlan Shows private VLAN information
NE,
PE
4-216
Summary of Contents for 6726AL2 FICHE
