![background image](http://html1.mh-extra.com/html/smc-networks/6726al2-fiche/6726al2-fiche_management-manual_1300177450.webp)
C
OMMAND
L
INE
I
NTERFACE
4-210
5.
Use the
switchport private-vlan mapping
command to assign a
port to a primary VLAN.
6.
Use the
show vlan private-vlan
command to verify your
configuration settings.
To configure isolated VLANs, follow these steps:
1.
Use the
private-vlan
command to designate an isolated VLAN that
will contain a single promiscuous port and one or more isolated ports.
2.
Use the
switchport mode private-vlan
command to configure one
port as promiscuous (i.e., having access to all ports in the isolated
VLAN) one or more ports as host (i.e., isolated port).
3.
Use the
switchport private-vlan isolated
command to assign a port
to an isolated VLAN.
4.
Use the
show vlan private-vlan
command to verify your
configuration settings.
private-vlan
Use this command to create a primary, community, or isolated private
VLAN. Use the
no
form to remove the specified private VLAN.
Syntax
private-vlan
vlan-id
{
community
|
primary
|
isolated
}
no private-vlan
vlan-id
•
vlan-id
- ID of private VLAN. (Range: 1-4094, no leading zeroes).
•
community
- A VLAN in which traffic is restricted to host
members in the same VLAN and to promiscuous ports in the
associate primary VLAN.
•
primary
- A VLAN which can contain one or more community
VLANs, and serves to channel traffic between community
VLANs and other locations.
•
isolated
– Specifies an isolated VLAN. Ports assigned to an
isolated VLAN can only communicate with the promiscuous port
within their own VLAN.
Summary of Contents for 6726AL2 FICHE
