![background image](http://html1.mh-extra.com/html/smc-networks/6726al2-fiche/6726al2-fiche_management-manual_1300177483.webp)
M
ULTICAST
F
ILTERING
C
OMMANDS
4-243
ip igmp snooping querier
This command enables the switch as an IGMP querier. Use the
no
form to
disable it.
Syntax
[
no
]
ip igmp snooping querier
Default Setting
Enabled
Command Mode
Global Configuration
Command Usage
If enabled, the switch will serve as querier if elected. The querier is
responsible for asking hosts if they want to receive multicast traffic.
Example
ip igmp snooping query-count
This command configures the query count. Use the
no
form to restore the
default.
Syntax
ip igmp snooping query-count
count
no ip igmp snooping query-count
count
- The maximum number of queries issued for which there has
been no response before the switch takes action to drop a client
from the multicast group. (Range: 2-10)
Default Setting
2 times
Command Mode
Global Configuration
Console(config)#ip igmp snooping querier
Console(config)#
Summary of Contents for 6726AL2 FICHE
