SlickEdit Corev3.3 for Eclipse, User Manual

Page: 531 / 568

ISPF Insert Before B
Usage
B [
n
]
Remarks
Identifies a line before which copied or moved lines are to be inserted
n
times. You are allowed to specify
multiple A , B , or O line commands to have the same copy or move block inserted in multiple places.
See Also
ispf_copy , ispf_paste , ISPF Line Command B , ISPF Line Command Copy , ISPF Line Command
Move , ISPF Line Command Overlay
ISPF Insert Bounds Ruler BNDS
Usage
BNDS
Remarks
Insert a column boundary ruler line. After this line is inserted, the < and > marks may be moved in order to
adjust the column boundaries. Note that if you have multiple bounds lines, and you change one, the sub-
sequent bounds lines will also be changed.
A column boundary line with one < sign indicates a left boundary and no right boundary (unbounded). A
column boundary with one > sign indicates a single column boundary (left and right bounds are same).
See Also
ispf_bounds , ISPF Line Command Shift , ISPF Line Command Overlay
ISPF Copy Lines C and CC for blocks
Usage
• C [
n
] - Copy
n
lines starting with the line with the command.
• CC - Copy a block of lines, must match another CC .
Remarks
Specify lines to be copied to another location. There are two forms to this command. The first form ( C [
n
] )
specifies that the line and the subsequent
n-1
lines are to be copied. The second (block) form ( CC ) is
placed on the first and last lines of the block to be copied. There can be only one copy block specified.
Furthermore, you can not have both a move block and a copy block specified at the same time.
See Also
ISPF Line Commands
509