SlickEdit Corev3.3 for Eclipse, User Manual

Page: 282 / 568

<tr>
<td>
</td>
</tr>
Please note that the number of line breaks is not the same as the number of blank lines. If you
wanted three blank lines, then you would set the number of line breaks to
4 .
• After close tag - Specify the number of line breaks after the closing tag. For example, if you were to
set the number of line breaks after the closing tag to 3 for the XHTML <td> tag, and the original con-
tent was:
<TR>
<TD>
</TD>
</TR>
The resulting content would be:
<TR>
<TD>
</TD>
</TR>
Please note that the number of line breaks is not the same as the number of blank lines. If you
wanted three blank lines, then you would set the number of line breaks to
4 .
• Stand-alone - When on, the selected tag will always have at least one preceding and trailing line
break on both its opening and ending tag when beautified. You can specify that there be more than
one line break by setting
Line breaks for the opening and closing tags.
Attributes/Values Tab
Figure 7.18. XML Beautifier: Attributes/Values Tab
XML
260