Sinclair ASC-18A, Service Manual

Page: 76 / 264

DC INVERTER U-MATCH AIR CONDITIONERS INSTALLATION
has to endure the unnecessary outside force. (As shown in Figure 1-3-10)
Drain hose(attachment)
．
Below75mm Below50
0
mm
Figure 1-3-10
‹ Please install the drain hose according to the following process if several drain hoses join together.
(As shown in Figure 1-3-11)
T-tie in join drain hose
Above100mm
．
The specs of the selected join drain hose should fits the running capacity of the unit.
Figure 1-3-11
‹ Check the smoothness of drain after installation.
‹ Check the drain state by immiting 600cc water slowly from the outlet vent or test hole. (As shown in
Figure 1-3-12)
‹
Check the drain in the state of refrigerating after installation of the electric circuit.
T
est hole cover
Drain hose
< Immiting water from the rest hole>
Ａｂｏｖｅ１００ｍｍ
．
Drain vent for repair use (plastic
stopper is included) (drain the water
in waterspout by this outlet vent)
[Way of immiting]
Test hole
<Immiting water from the outlet
vent terminal>
Plastic water pot (The length of the
pipe should be about 100mm.)
Figure 1-3-12