Sinclair ASC-18A, Service Manual

Page: 64 / 264

DC INVERTER U-MATCH AIR CONDITIONERS INSTALLATION
‹ Such a place where is 1m or more away from other electric appliances such as television, audio
device, etc.
‹ Avoid a location where there is heat source, high humidity or inflammable gas.
‹ Do not use the unit in the immediate surroundings of a laundry, a bath, a shower or a swimming
pool.
‹ Be sure that the installation conforms to the installation dimension diagram.
‹ The space around the unit is adequate for ventilation
1.2.3 Caution for Installation
‹ Adjust the distance from the unit to the ceiling slab beforehand (Refer to Figure 1-2-1).
‹ Fix the hanger bracket to the suspension bolt (Refer to Figure 1-2-2).
‹ Make sure that extended suspension bolt from the ceiling stays inside the arrowed position.
Readjust the hanger bracket when it is outside the arrowed position. (Refer to Figure 1-2-3)
‹ Suspension bolt stays inside the cap of indoor unit .Never remove the cap. Lift the unit and slide
forward unit the dent. (Refer to Figure 1-2-4)
‹ Screw tightly both hanger bracket setting bolts (M8) (Refer to Figure 1-2-2)
‹ Screw tightly both hanger bracket fixing bolts (M6) to prevent the movement of the indoor unit.
(Refer to Figure 1-2-2)
‹ Adjust the height by turning the nut with a spanner. Insert the spanner from the hanger bracket
opening. (Refer to Figure 1-2-5)
Hanger bracket Figure 1-2-1 Figure 1-2-2
Figure 1-2-3 Hanger bracket Figure 1-2-4
In case of hanging:
It is possible to install using inward facing hanger bracket by not removing the brackets from the indoor
unit. (Refer to Figure 1-2-6) Be sure to use only the specified accessories and parts for installation work.