manualshive.com logo in svg

Siemens SINAMICS G110M, Operating Instructions Manual, Page: 37 / 428

Share
Download
Siemens SINAMICS G110M Operating Instructions Manual Download Page 37

Immunity to voltage drop of semiconductor process equipment.
The converters comply with the requirements of standard SEMI F47-0706.

China RoHS
The converters comply with the China-RoHs directive. Further information is provided on the 
Internet:

 China RoHS (

https://support.industry.siemens.com/cs/ww/en/view/109738656

)

Quality systems
Siemens AG employs a quality management system that meets the requirements of ISO 9001 
and ISO 14001.

Certificates for download

•

 EC Declaration of Conformity: (

https://support.industry.siemens.com/cs/ww/de/view/

58275445

)

•

 Certificates for the relevant directives, prototype test certificates, manufacturers 

declarations and test certificates for functions relating to functional safety ("Safety 
Integrated"): (

http://support.automation.siemens.com/WW/view/en/22339653/134200

)

•

 Certificates for products that were certified by UL: (

http://database.ul.com/cgi-bin/XYV/

template/LISEXT/1FRAME/index.html

) 

•

 Certificates for products that were certified by TÜV SÜD: (

https://www.tuev-sued.de/

industrie_konsumprodukte/zertifikatsdatenbank

) 

Standards that are not relevant

China Compulsory Certification
The converters do not fall in the area of validity of the China Compulsory Certification (CCC).

Description

3.4 Directives and standards

Distributed converter for SIMOGEAR geared motors
Operating Instructions, 10/2020, FW V4.7 SP13, A5E31298649B AL

35

Summary of Contents for SINAMICS G110M













































































































































































































































































































































































































































Reviews:

No comments