Siemens SINAMICS G110M, Operating Instructions Manual, Page: 241 / 428

The parameter belongs to the unit group 7_1 and p0505 changes over the unit.
Table 8-44 Unit group (p0100)
Unit group Unit selection for p0100 =
0 1 2
7_4 Nm lbf ft Nm
14_6 kW hp kW
25_1 kg m² lbf ft² kg m²
27_1 kg lb kg
28_1 Nm/A lbf ft/A Nm/A
Table 8-45 Unit group (p0505)
Unit group Unit selection for p0505 = Reference value for %
1 2 3 4
2_1 Hz % Hz % p2000
3_1 rpm % rpm % p2000
5_1 Vrms % Vrms % P2001
5_2 V % V % p2001
5_3 V % V % p2001
6_2 Arms % Arms % p2002
6_5 A % A % p2002
7_1 Nm % lbf ft % p2003
7_2 Nm Nm lbf ft lbf ft -
14_5 kW % hp % r2004
14_10 kW kW hp hp -
21_1 ° C ° C ° F ° F -
21_2 K K ° F ° F -
39_1 1/s² % 1/s² % p2007
8.14.3 Technological unit of the technology controller
Options when selecting the technological unit
p0595 defines in which technological unit the input and output variables of the technology
controller are calculated, e.g. [bar], [m³/min] or [kg/h].
Reference variable
p0596 defines the reference variable of the technological unit for the technology controller.
Advanced commissioning
8.14 Selecting physical units
Distributed converter for SIMOGEAR geared motors
Operating Instructions, 10/2020, FW V4.7 SP13, A5E31298649B AL
239