Siemens SIMOTION SCOUT Configuration Manual Download Page 80

Page: 80 / 244

6.4.1.4

SIMOTION devices in the hardware catalog

You can find the SIMOTION devices in the corresponding directories of the hardware catalog

in HW Config.

With SIMOTION D, the SINAMICS version is selected in addition to the SIMOTION version.

The SIMOTION version determines whether one or more SINAMICS versions are available.

Adding interfaces

After you have inserted the SIMOTION device, the dialog for configuring the interfaces opens

Note
With SIMOTION D, the PROFIBUS subnet PROFIBUS Integrated DP master system is created

and configured automatically. The user may neither configure nor select it!

Figure 6-8

Hardware configuration of a D4x5

Detailed information on the configuration of the SIMOTION device is contained in the

corresponding documentation for the SIMOTION devices.

6.4.2

Selecting technology packages

The technology packages (e.g. TP CAM, TP PATH, DCBlib) are available in various versions

for installation purposes.

Configuring/parameterizing
6.4 Configuring devices

SIMOTION SCOUT

Configuration Manual, 11/2016

Summary of Contents for SIMOTION SCOUT





















































































































































































































































Search results

Summary of Contents for SIMOTION SCOUT

Reviews:

Related manuals for SIMOTION SCOUT

Brands by name

Popular brands

Siemens SIMOTION SCOUT, Configuration Manual

Search results

Summary of Contents for SIMOTION SCOUT

Reviews:

Related manuals for SIMOTION SCOUT

Brands by name

Popular brands