Home
/
Siemens
/
SIMOTION SCOUT
/
Configuration Manual

Siemens SIMOTION SCOUT, Configuration Manual, Page: 153 / 244

Share

Page: 153 / 244

Siemens SIMOTION SCOUT Configuration Manual Download Page 153

Procedure

To select a target device, proceed as follows:
1. Select Target system > Select target devices... in the menu.

The Target device selection dialog opens.

Figure 7-3

Selecting target devices and access points

2. Activate the checkbox for the respective device.
3. Click the Establish state button to:
● Establish a connection to a device that was deselected when going online and that has

been subsequently selected.

● Separate a connection to a device that was selected when going online and that has been

subsequently deselected.

Target system

7.2 Going online/offline with SIMOTION SCOUT

SIMOTION SCOUT

Configuration Manual, 11/2016

153

«
...
151
152
153
154
155
...
»

Summary of Contents for SIMOTION SCOUT





















































































































































































































































Reviews:

No comments